Elcatech has completed succesfully a series of projects with varies customers through professional execution and aggressive lead times. Following are several recent Elcatech's Embedded Hardware/Software projects that demostrates our diversified skills and capabilities that enable us to deal with complex projects in wide range of technology areas:
Marvell's BobCat based Networking Platform 1
-
Complex multi-layer high speed board design
-
Integrated 800Mhz ARM processor with DDRII interface
-
Varies high-speed on board and backplane SerDes busses implemented: XAUI (10G), QSGMII (5G), SGMII (1G), PCIe
-
Complex internal stacking ports for cascading two boards and supporting 96 1G ports in total.
-
Varies external interfaces: 48 1G copper (24 through a dedicated backplane), two 1G fiber (SFP)
Marvell's BobCat based Networking Platform 2
-
High density, multi-layer high speed board design
-
Varies networking interfaces: 24 copper GbE, four 1G fiber (SFP), four 10G Fiber (SFP+)
-
Fast bring up and delivery lead time
Atmel's SAM3S Based Multimedia Platform
-
Cortex-M3 ARM core
-
Nand Flash and PSRAM memory peripherals
-
CMOS camera sensor PCB (Elcatech's custom PCB design)
-
Audio Speaker and electret microphone interfaces
-
USB 2.0 or battery powered
ST's STM32 Based Industrial Applications Platform
-
Elcatech's full turnkey project that involves: embedded HW/SW design, purchasing and production
-
ARM Cortex-M3 STM32F107 MCU with 10/100BT, USB2.0 and serial data interfaces
-
Altera's MAXII CPLD based VHDL implementation of DC motor control (4 simultaneous channels)
-
868Mhz/915Mhz RF receiver for wireless control
ALTERA's ARIAII based communication platform
-
ARIAII GX FPGA based multiprotocol high density, multilayer communication platform
-
PLX PCIe to PCI-X bridge
-
Compliant with VITA VPX XMC module standard
-
Varies communication interfaces: SerDes, ECL, RS422
-
Class 3 military grade design
TI's CC11XX (Chipcon) based RF Transceiver
-
433/868/915MHz or 2.4GHz wireless receiver/transmitter
-
Extremely compact form factor (approx. 10mm x 20mm)
-
Onboard chip Antenna
-
Programmable output power (-30 dbm to +10dbm)
-
Extremely low power consumption: 0.2uA in idle mode suitable for long life battery applications (operated by a CR1025 battery)
-
Flex PCB based technology user interface
-
Elcatech's full turnkey project that involves: Embedded HW/SW design, purchasing and production (high volume)
Multi-format video switching platform
-
Elcatech's full turnkey project that involved: Embedded HW/SW design, purchasing and production
-
TI's MSP430 based MCU
-
DVI, VGA and composite video switching implementation (Mux/Demux application)
-
Lithium Battery charger implemntation
-
USB 2.0, 10/100BT and serial communication interfaces
VITA VPX compliant communication backplane
-
VITA VPX standard compliant multilayer high speed backplane
-
Varies high speed interfaces: SATA, PCIe, DVI, USB, GbE SerDes
VITA VPX compliant complete fully custom system
- 20 layer high speed 9 slot backplane (6 VPX and 3 proprieatary)
- Varies high speed interfaces: SATA, PCIe gen2, DVI, USB, GbE SerDes
- Three complex modules: PCIe/Ethernet/UART Switch, IO module and Front panel
Fully Custom Switch Module
- 10 port PCIe Gen2 x4 switch (PLX's PEX8648 based)
- 10 port GbE SerDes Ethernet switch (Marvell's 88E6185 based)
- 8 port PCIe to UART bridge
- High density proprietary backplane interface
Fully Custom Communications IO Module
- Arinc-429 and MIL-STD-1553 ports
- Multi LVDS, RS422 and UART ports
- DVI and USB interfaces
- PCIe to PCI-X bridge (PEX8112)
- ALTERA's Cyclone IV FPGA firmware development
Elcatech Ltd. Tel: +972-3-6700806 Fax:+972-3-6700807 Email: sales@elcatech.com
Address: 58 Amal St., Petach-Tikva, Israel