Your Subtitle text
INDUSTRIAL AND CONSUMER ELECTRONICS PROJECTS

Elcatech has completed successfully a series of projects with varies customers through professional execution and aggressive lead times. Following are several recent Elcatech's Embedded Hardware/Software projects that demonstrates our diversified skills and capabilities that enable us to deal with complex projects in wide range of technology areas:

Marvell's BobCat based Networking Platform

  • Complex multi-layer high speed board design
  • Integrated 800Mhz ARM processor with DDRII interface
  • Varies high-speed on board and backplane SerDes busses implemented: XAUI (10G), QSGMII (5G), SGMII (1G), PCIe
  • Complex internal stacking ports for cascading two boards and supporting 96 1G ports in total.
  • Varies external interfaces: 48 1G copper (24 through a dedicated backplane), two 1G fiber (SFP)


 Atmel's SAM3S Based Image Recognition Platform 

  • Cortex-M3 ARM core
  • Nand Flash and PSRAM memory peripherals
  • CMOS camera sensor PCB (Elcatech's custom PCB design)
  • Audio Speaker and electret microphone interfaces
  • USB 2.0 or battery powered   

 

ST's STM32 Based Motor Control and Communications Platform

  • Elcatech's full turnkey project that involves: embedded HW/SW design, purchasing and production 
  • ARM Cortex-M3 STM32F107 MCU with 10/100BT, USB2.0 and serial data interfaces
  • Altera's MAXII CPLD based VHDL implementation of DC motor control (4 simultaneous channels)
  • 868Mhz/915Mhz RF receiver for wireless control 
  • Medical Grade  

                     

  TI's CC11XX (Chipcon) based RF Transceiver 

  • 433/868/915MHz or 2.4GHz wireless receiver/transmitter
  • Extremely compact form factor (approx. 10mm x 20mm)
  • Onboard chip Antenna
  • Programmable output power (-30 dbm to +10dbm)
  • Extremely low power consumption: 0.2uA in idle mode suitable for long life battery applications (operated by a CR1025 battery)
  • Flex PCB based technology user interface
  • Elcatech's full turnkey project that involves: Embedded HW/SW design, purchasing and production (high volume)  

 

Multi-format video switching platform  

  • Elcatech's full turnkey project that involved: Embedded HW/SW design, purchasing and production
  • TI's MSP430 based MCU
  • DVI, VGA and composite video switching implementation (Mux/Demux application)
  • Lithium Battery charger implementation
  • USB 2.0, 10/100BT and serial communication interfaces

 

  

 Consumer Electronics Video Processing and Wireless Platform

  • Freescale iMX6 based (Dual 1Ghz Cortex-A9 Core)
  • 64bit DDRIII, eMMC and NOR Flash memories
  • HD MIPI image sensor, IR TX/RX and LCD interfaces
  • TI CC2541 based Bluetooth low energy interface
  • TI CC3100 based WiFi interface
  • Complete full turnkey project of Elcatech - Hardware Design, Layout, BLE firmware and Production



 Consumer Electronics Low cost rechargeable audio .wav player
  • Automotive grade
  • STM32 Cortex-M0 based
  • Download of external .wav audio files to on board SPI Flash
  • Playback of .wav files upon programmable user events
  • Operated by rechargeable lithium Ion battery, external USB charger for cellular phones 
  • Full turnkey project of Elcatech - System design, Hardware/Software Development and Production

 

Wireless Audio Streamer and Control Device 

  • 868/915MHz receiver/transmitter (TI's CC1110 based)
  • Onboard wire Antenna
  • Programmable output power (-30 dbm to +10dbm)
  • Rechargeable Lithium battery
  • Audio Headset interface with 8Khz wireless streaming support
                                              

DVB-T Receiver for the Consumer Market 

  • UHF/VHF DVB-T receiver, QPSK, 16QAM, 64QAM modulations
  • STM32F427 MCU based (ARM Coretx-M4, 180Mhz core) with LCD, audio decoder, SD card and RF demodulator peripherals
  • Integrated LCD and capacitive touch keypad
  • Integrated 3W stereo speakers and headphones interface

VME Ethernet Switch Module 

  • Vittese VSC7429 based architecture
  • 26 Giga-bit Ethernet backplane ports

Fully Custom Communication Processing Platform
  • Industrial Grade processing platform
  • Based on Freescale's iMX7 SOM (Dual Core 1Ghz ARM Cortex A-7)
  • Integrated 10 port Giga Bit Ethernet Switch (Marvell's 88E6185)
  • Support in varies communication interfaces: USB2, USB3, 10/100/1000BT, CAN, GPIB, RS232, Smart Card

Production Automatic Test Equipment Development Project
  • Intended for efficient fully automated functional testing of x6 consumer electronics boards
  • Based on bed of nails, dedicated tester UUT controller hardware/software and dedicated PC software/database
  • All the tester hardware and software components designed, integrated and produced by Elcatech as a complimentary service to a full turnkey consumer electronics product development
  • Tester controller board based on STM32 MCU for ADC measurements and DC switching of UUTs, 6 port USB 2.0 HUB, JTAG multiplexer 

                 

Elcatech Ltd.       Tel: +972-3-6700806     Fax:+972-3-6700807      Email: sales@elcatech.com 
    Address: 58 Amal St., Petach-Tikva, Israel